ITead Studio

POST means “Power On Self Test” , it’s a nice tool to help you to debug your PC!

The purpose of this diagnostic card is to make the difficult troubleshooting procedure easier and quicker. This test card will assist any technicians (from novice to advance users) in accurately and conveniently locating their hardware problems faster, cutting down the troubleshooting time drastically simply by displaying an easy to follow POST code on its display.

It use the STC 8bit MCU and XILINX CPLD,screen is the Noika 5510 LCD module. What different from other diagnostic cards ? It may be the first one that using the LCD to display your issue and show the solution!

This diagnostic card support Award , AMI and Phoenix BIOS. Just plug into the PCI slot and it will conduct a complete hardware diagnostic test to detect the defective hardware in no time.

Use the button on the debug card to switch the display.

Features

• Quick and easy to install into an open PCI slot of your motherboard.

• Easy to read LCD Display then other digits display card.

• Will assist in revealing where problem is while troubleshooting.

• Can be used to identify whether CPU or motherboard is defective.

• Will help to determine if the memory is faulty.

• Able to pinpoint whether the Video card is problematic.

• 6 LEDs that can hint whether power supply is failing.

• Simple to follow POST Code table for problem description.

• Drastically reduce troubleshooting time.

• Helpful to both Novices and Experienced users alike.

Package Content :

1X Diagnostic Card
1X User manual in English

You may also be interested in these posts:

1. OverLoad Prototyping
2. ITDB02 Shield V1.2 And ITDB02 Library V1.1
3. 2.4" TFT Display Shield And Library For ChipKit
4. Seleae Logic + USBee AX + USB Blaster
5. ITDB02 LCD Shield For Arduino